Anabolic Steroids Medicine Essay Sample

Anabolic Steroids Medicine Essay Sample Anabolic Steroids Medicine Essay Example Anabolic Steroids Medicine Essay Example Nowadays, the question of potential legalization of anabolic steroids is discussed in various scientific circles. Current paper deals with all main aspects of this issue evaluating the arguments for and against legalization. Legal issues, such as the access to free competition and equal rights of all sportsmen, are examined. In general, the critical analysis of various positions demonstrates that anabolic steroids as well as other performance enhancers should not be allowed because all sportsmen have to be in equal initial conditions, and all forms of illegal advantages should be strictly prohibited. Should Performance Enhancers (Anabolic Steroids) Be Allowed in Sports? The utilitarian arguments regarding potential advantages of steroids legalization are examined and their logical flaws are specified. Some broad sociological and economic aspects are present for the complex understanding of the situation, and the paper explains their relation to legal issues. In general, the paper contributes to understanding of sports law as it shows that no conflict between utilitarian arguments and basic individual rights and liberties exists. First of all, it is necessary to briefly outline the current status of performance-enhancing drugs in sports. Nowadays, the use of steroids or other drugs is officially considered immoral. Therefore, it is strictly prohibited by all major sports organizations, including the International Olympic Committee. The supporters of legalization claim that the use of drugs does not affect competition more than modern equipment that also creates advantages for some sportsmen (Atkinson, 2011). However, such comparison is invalid for several reasons: Firstly, the supposed violation of law and rights of others in one area does not make such violations in other spheres moral. Secondly, the use of modern equipment really creates additional advantages for some sportsmen, but it is an example of fair competition because it is allowed by sports regulations and it does not violate the rights of others. At the same time, the use of drugs violates the rights of other sportsmen who follow regulations and thus creates unfair advantages. The relevant aspect in this context is not whether some actions or procedures create potential advantages or not but rather their influence on the rights of other parties involved. The opposite position about prohibiting everything that creates any sort of additional advantages will lead to a contradiction as the whole training process and the essence of sports per se aims at demonstrating higher results than other participants (i.e. demonstrating one’s advantages). Thus, the factors that increase sportsmen’s results should not be prohibited on the basis of such positive impact. However, from this statement does not follow that all types of stimulators are performance enhancers. One of main sports goals is demonstrating the highest achievements of human body and spirit. For example, viewers are interested not in high speed per se but in understanding what speed is attainable for individuals that follow the generally accepted rules. Consequently, the abolition of any restrictions will lead to the absence of sports ideas and its substitution by machines’ competition. Thus, the decision about the potential regulations and prohibitions should be based on the structure of all participants’ rights. As the International Olympic Committee and other similar organizations always explicitly state which drugs are prohibited, it demonstrates the rules for all sportsmen and established the boundaries of fair competition. Another argument of supporters of legalization refers to the empirical fact that performance enhancers have been using throughout history even in Ancient Times. Thus, they claim that as enhancers cannot be completely avoided, they should be legalized. However, this statement contains a logical error, as well. The fact of regulations’ violation does not make such violations desirable. For example, stealing is also observed throughout history, however, it does not make it legal or socially desirable. Although there is a fraction of people willing to obtain unfair advantages, such practices should not be legalized. On the contrary, they may help to differentiate within the whole set of participants and exclude those sportsmen who violate the rights of others. Another possible argument in favor of legalization refers to the fact that doping control is very expensive and these funds may be used more effectively (Atkinson, 2011). However, it seems to be unsupported, as well. It is correct that control efforts (that include not only doping control during competition) lead to additional expenses. Moreover, such funds could be directed to other fields if the problem of unfair competition did not exist. However, it exists and requires additional controlling efforts. Using an analogy, it may be stated that the absence of criminal activities could allow reducing expenses associated with police activities. At the same time, the existence of such expenses under the current conditions does not seem unreasonable. Anti-doping authorities often explain that all sportsmen should have equal opportunities. However, this statement should be correctly interpreted. The main idea is not removing all sources of inequality (as it is impossible even theoretically, as well as it negates the essence of sports competition) but respecting the rights of all participants. In this way, the boundaries of fair competition are identical for all people. It corresponds to the meaning of fair competition. An additional ethical aspect should be clarified. Nowadays, professional sports demonstrate the highest results of the human body without any artificial performance enhancers. Thus, people willing to improve or at least maintain their health may participate in professional sports. However, it will be impossible if anabolic steroids are legalized. As they artificially increase one’s sports results, it will be evident a priori that professional sportsmen will have significant health problems in the future. Therefore, a large number of potential sportsmen will refuse to select this occupation. Moreover, viewers prefer understanding professional sport as a tool of promoting a healthy lifestyle, and the negation of health in the initial instructions will not guarantee the necessary interest within the population. If performance enhancers are allowed, it will almost exclude the majority of developing countries from competition. At the present moment, the countries with high standard of living have some advantages; however, other countries also demonstrate significant results in some sports spheres. If legalization is adapted, the financial factor will become the main one and the global interest to sports will decline as only several the most financially successful countries will compete in all kinds of sports. The International Olympic Committee declares that sport should be promoted all over the world and the realization of this principle may become problematic in case of legalization (Werner Hatton, 2011). Thus, it is evident that there is no contradiction between utilitarian arguments that try to satisfy the interests of all parties involved and the legal perspective. If rights of all sportsmen are protected, the general social satisfaction is maximized, as well. Therefore, it is reasonable to concentrate on expanding the principles of fair competition to all spheres, as well as providing the strict control over the fulfillment of these regulations. It is possible to use random statistical selection for doping control in some minor sports events while during the Olympic Games and various world championships all participants should pass the test procedures. Current system of double-testing seems to be reasonable as it reduces the probability of error to almost zero. As all sportsmen understand that any violations may be immediately detected, they will modify their behavior accordingly and the temptation to use drugs will decrease. Although sports committees cannot determine the specific actions of all sportsmen, they may affect their incentive structures that indirectly influence their actual behavior (Donahue et al., 2007). It seems that the number of regulations should be minimal, but they should be adequately enforced. In particular, sports committees should outline the list of prohibited drugs and make this information available for all interested people. Then, the effective control systems should be introduced and the main attention should be paid to such sports events as the Olympic Games. Sports authorities should not make any value or moral judgments but be entirely concentrated on the legal perspective. All moral conclusions may be formulated by the public and it will lead to higher sports popularity worldwide. Our SamplesThe best way to know how to write good essays is by getting a sample of an essay from competent experts online. We can give you the essay examples you need for future learning. Free Essay Examples are here. The advocates of legalization also claim that under the present conditions all famous sportsmen experience some forms of uncertainty and suspicion from the public. It occurs due to the fact that both viewers and officials want to receive the results of doping tests that will confirm the absence of any prohibited drugs in the blood or body of a given sportsman (Atkinson, 2011). Thus, the advocates of this position suggest that if anabolic steroids are legalized, no additional confirmation is needed, and the winners may receive their fame immediately. However, it is necessary to examine this position in detail: Firstly, the goal of sports committees is not maximizing the psychological satisfaction of the winners at any price but ensuring the proper following of all generally approved requirements. Secondly, it is unclear whether this satisfaction would actually increase as most people prefer winning in fair competition. Thirdly, sports fans usually see sport events as an example of equal opportunities (at least, in the legal sense). Thus, the legalization of steroids may negatively affect their interest and ultimate demand for such events (Ozdemir et al., 2005). As a result, sports competitions may become less prestigious and may generate fewer amounts of money and other privileges (sponsor contracts, advertizing proposals, the overall reputation in society, etc.) for the winners. Taking into account all these considerations, it may be expected that all participants (and especially the future champions) are interested in fair competition and equal standards for all sportsmen. It seems that regulations and sports instructions should not create additional risks and threats for sportsmen. The nature of modern professional sport is such that substantial health risks are present in any case. However, their amount should not be artificially increased. It is evident that legalization of anabolic steroids will make the traditional (without using any drugs) winning of any serious championships absolutely impossible. Nowadays, many sportsmen are examples and role models for young people, but it seems that the situation may change if the public is aware that all champions use steroids. Therefore, the potential legalization may have negative consequences for the US society in general. Theoretically, there is another alternative to the issue under consideration. For example, two leagues may exist. The first one will operate on the traditional basis and anabolic steroids and other performance enhancers will be prohibited. In the second league, the use of drugs will be legal and sportsmen from different leagues will compete only within their leagues. Such proposal is legally coherent as no one is forced to use drugs and is free to choose the optimal alternative from his/her point of view. The viewers’ rights are protected as well because they may choose any league they like and the use of steroids in one of them is known from the very beginning. Although this option is possible from the legal perspective, it is not highly plausible that these two leagues will emerge in the near future. Such separation will not allow economizing substantial financial resources as strict doping control in one of the leagues will be still needed. Moreover, some expenses will even increase as it will be necessary to organize much more events and forums for both leagues. However, the consumer demand for these events is limited and the profitability rates may decrease. As sports fans prefer determining the only champion in each kind of sport (that will be impossible in the new format), it is not likely that this idea will be supported by the public. Various health-oriented organizations may explicitly argue against any sports projects that allow using doping. It may negatively affect the reputation of sports organizations and lead to numerous social conflicts in sport. Thus, under the current state of the consumer demand and public preferences, it is unlikely that the idea of two separate leagues may be realized in the actual practice. The advocates of legalization also suggest that it may help to solve problems of the Hall of Fame voting. Even the smallest doping suspicion of an athlete may not allow him/her being selected. Therefore, some experts propose to legalize drugs to make this process more clear and timely. However, the problem of determining the best representatives of some profession exists not only in sports and it is important to verify all relevant aspects in order to guarantee the correspondence of a given candidate to the existing rules. For example, the works of all scientists are verified in relation to their originality; if any plagiarism issues are found, it leads to serious negative consequences for a given scientist. In fact, he/she cannot expect to receive any significant reward in the future due to his/her reputation as a result of such issues. The similar principles may be observed in sports. Federations and public in general wish to have evidences that a given athlete follows all recommendations and does not violate the rights of other participants. Although such test procedures require time and financial expenses, they are the necessary attribute of any fair competition (Eber, 2009). It seems that the function of the Hall of Fame is to praise the most talented and successful sportsmen rather than facilitating the process of inclusion of potential candidates. The effectiveness of doping control depends on the actual implementation of the main regulations. There are two main options that exist in this context. The first one is large government involvement. The second one is independent regulations of corresponding sports leagues. The supporters of the first initiative suggest that the government may be more efficient in enforcing all relevant rules and even develop new legal obligations for the citizens. However, it seems that the second option may generate much better results for several reasons: Firstly, the government operates on the basis of tax-collected funds. It means that the redistribution of wealth takes place and involuntary actions are observed. The legal and sociological theories show that social systems work more productively if they are organized on a completely voluntary basis. Secondly, independent leagues are better aware of all internal problems and are more responsive to the external challenges. The government may use a large number of experts, but their overall coordination will not be based on the profit-and-loss system and higher bureaucratization may emerge (Showalter, 2007). Thirdly, independent leagues are interested in timely decisions of the existing problems and try to find the most rational decisions from the social and economic point of view. At the same time, government agencies do not have strong incentive structures for searching timely solutions and their decisions are mostly based on the political desirability rather than economic calculation. Thus, it seems that government involvement in this process should be minimized as it negatively affects the realization of basic sports principles. Unfortunately, it is problematic to completely separate sport from politics as during the Olympic Games and other forums sportsmen represent not only them and their team but the country in general. Therefore, some political pressure from national governments is often present. However, it is reasonable to limit government presence in all sports spheres as it negatively affects the implementation of principles of fair competition (Showalter, 2007). Moreover, the prohibition of anabolic drugs may be effectively enforced without the government participation in this process. As these regulations may be introduced by independent leagues, penalties may be different in various kinds of sports. At the same time, it does not constitute serious problems because each kind of sports has its specifics that should be reflected in corresponding rules. The most important thing is the recognition of the illegal nature of anabolic steroids and the understanding of introducing corresponding penalties for those sportsmen who try to receive unfair competitive advantages. It seems that not all sports federations pay the necessary attention to the problem of doping. In particular, soccer and some other team sports federations do not suggest it to be this issue their main responsibility. Although the net effect of doping in team sports seems to be less than in individual ones, the respect to other sportsmen’s rights should be maintained in all sports spheres. Thus, soccer and other sports federations should ensure the fulfillment of all fair competition requirements. It will increase the sports’ popularity among people worldwide and may generate additional revenues for federations. The close analysis of various arguments regarding the potential legalization of anabolic steroids has shown that they are unsupported and have substantial logical errors. All athletes should have equal rights and follow the generally accepted rules that are developed by the corresponding federations. The analogy of anabolic steroids with the modern equipment is incorrect because equipment’s advantages are not based on the violation of other people’s rights. Although doping control is expensive, it is the necessary element of expenses because all sports fans are interested in fair competition. Their demand for sports events is based on the assumption that all participants have equal opportunities. If this assumption is not followed, many viewers will shift their demand to other spheres. The potential legalization of performance enhancers will create serious problems for developing countries and will reduce the overall level of competition. The analysis demonstrates that there is no contradiction between the basic legal rights and utilitarian arguments. Sportsmen may be accepted to the Hall of Fame only when their doping tests are thoroughly evaluated and it is correct as only those athletes who follow all regulations may receive the chance of being selected. It is determined that the control over the fulfillment of anti-doping requirements should be delegated to independent leagues rather than national governments. Sports leagues are better aware of the local situation and are highly motivated in finding the most timely and efficient solution. Some differences among various sports federations may exist, but all of them should share the basic principles of doping control and penalties. It is especially relevant for soccer and other team sports federations. In any case, the use of anabolic steroids and other performance enhancers should not be allowed in sport.

Essay on Media Studies

Essay on Media Studies Essay on Media Studies Part A & B: Key Codes and conventions of Reality Television: Real people, not actors. This provides the opportunity for viewers to observe how other people live and behave. Ex: The models of ANTM are there because they want to become a better model and win a competition, the competition is using real people, not actresses. Before this show was introduced, models lived in an unseen world. ANTM provides a peek into the world of fashion from a certain perspective. ‘Real’ life situations. Even though though the storylines are ultimately controlled by directors. the situations are supposed to be based off of the characters genuine situations. Ex: Models often times enter the competition for dramatic and personal reasons, such as trying to support a disabled child, or because they want to make their parents proud. Largely Unscripted. This allows for the unpredictable to happen. It also provides real reactions. Ex: Models are often genuinely shocked and excited when the competitions are announced, many aspects of the show are kept secret in order to provoke a genuine reaction from the models. A story, journey, or a contest. Often times, reality television have some form of narratives to help organise the story. Ex: Models are competing to become the top model, one or two models are eliminated each week. There are usually subtitles to tell viewers where the models are and the location everything is taking place. A voiced over narrator, a host or a presenter. This provides a character for the viewers to rely on for key information. Ex: Tyra Banks is the host and head judge of ANTM, she is present in every episode. Participants had to volunteer, or be chosen to participate in the show. Ex: In ANTM models must put in applications and modelling portfolios in order to be chosen to participate. Models then go through a second process in order to choose a lesser amount (There are usually hundreds of appliques). An element of competition. The participants are usually interacting with each other or their environment for a large prize or reward. Prize could pertain to participants financial, career, popularity or love life. Ex: There is always a grand prize for the winner of ANTM, usually including a modelling contract and a large sum of money. There are also smaller prizes along the way for winners of weekly competitions. Weekly competition prizes include things such as but not only pertaining to: spa trips, fancy meals, designer clothing and comfortable beds. Potential of conflict. Participants will often have on screen confrontations and take sides. This is due to personality clashes or disagreements among themselves. Ex: In almost every episode of ANTM, models are in a confrontation and are arguing with each other. There are often large personality clashes because the models are stressed and living in a small housing environment. Entertainment. Viewers should be able to view and enjoy the participants rise to fame, and or their discomforts and successes. Viewers of ANTM almost always have a favourite model who they would like to win. Audience Interactivity. There are often opportunities for the viewers to influence the outcome of the show by voting. Even more common is the creation of fan sites, facebook pages, youtube reviews and forums. Ex: In recent seasons, ANTM have integrated a social media score that allows viewers to vote and give opinions on the models performances. Use Of Music: In ANTM, the chosen music pieces seamlessly reflect the actions occurring in the scene. For example, when the models are waiting in suspense for results, the music will portray the mood and be some sort of suspenseful track. It is found that the music used in the show are not well known songs but simple backing music that reflects the mood of the segment. There are cheap soundtracks that can be found on the internet that include tracks for basic reality television themes. These themes include: Suspense, competition,

Private Prisons in Texas Research Paper Example | Topics and Well Written Essays - 3000 words

Private Prisons in Texas - Research Paper Example The aim of the creation of private prisons has been for the purpose of making a profit by private entities through the taking over the tasks of convict rehabilitation that were conducted by the government. While this has been the case, the fact remains that there has been a lot of concern about the shifting of legal punishment from the public to the private sector, the logic being that governments, being accountable to the public, are more concerned about the welfare of those imprisoned than private institutions, which have no real interests in the inmates except for the economic benefits that they receive. Therefore, the concerns raised are based on the fact that private prisons may be lax in their establishment of a corrections system that is effective as compared to government held prisons, which have such guarantees. Private prisons in the state of Texas have been criticized to be business institutions whose main aim is to ensure that they maximize their profits, since their driv ing incentive is to make as much money as possible. Plenty of skepticism in such prisons have been raised because of the fact that prisons have now become profit yielding institutions through the imprisoning of individuals caught committing crimes and sentenced. Despite the concerns that have been raised above about the establishment of private prisons, the government of Texas has continued to be adamant that private corporations can run prisons as well as the government itself and that there is no need to worry about these institutions’ doing a bad job. The state of Texas has attempted to delegate the functions of punishment to private companies with the intention of relieving itself of the burden, but also ensuring that these companies remain accountable to the public. While this has been the case, there has developed the need to ensure that these private entities are indeed performing the functions that have been delegated to them with as much diligence as would have the g overnment.1 This has created a situation where studies have to be conducted so that it can be established how the contractual relationship between private prisons and the government, relating to how the formation, maintenance and other aspects of the prisons are worked out between them. When dealing with the formation, the expectations of the private institution as well as those of the government concerning what the prison’s management will require are considered so that it is known how the prison will be developed as well as how it will be staffed. The maintenance of the prison has been outlined as the affairs which will be involved in the daily running of the prison as well as the establishment of the definitions of how the prisoners will relate to each other as well as how they will relate with the members of the prison staff.2 When one considers liability in private prisons, it basically deals with the failure of the parties involved, either the government or the private entity, to fulfill their obligations as stated in the contract between them and the consequences that are likely to follow. Through the insistence of these obligations, it becomes an obligation for both the government and the private entities running the prison to ensure that there is accountability to the public in the process. Thus, accountability can be enforced, whereby there is the protection of the various social groups within the

Postmodernist Approach to Burial practice Research Paper - 2

Postmodernist Approach to Burial practice - Research Paper Example Notions of the people particular to God, heaven, hell, witches, spirits and souls are also leaded by the same. Conception of the related believes of the individual and society has the consequences on the rituals performed. It is around 10,000 years back that the death ritual is performed among the few earliest rituals of society. Variable practices are followed by the people of diversifying beliefs and one of the main reasons acting behind the burial practice of the people seems to be the one practiced by the ancients of particular group of people [CE11]. From Southern Iberia at Abrigo do Lagar Velho, the human burial of Upper Paleothic was discovered as an evidence of early modern humans in the European society [CD99]. Burial ritual is the found to be the most transformed ritual of the modern society and is very diversified in its nature depending upon a lot of social, cultural and religious factors but some of the anthropologists find the burial ritual as an only ritual which remained the same in practice in respect of the change in human behavior and the growth of the healthy cultural values [JC10]. Two of the postmodernist approach to burial practice includes cremation and embalming [LA04]. Cremation practice is followed almost all around the world. Problem of overcrowded cemeteries in the modern societies is thought to be resolved by the same process. Although cremation practice is relatively low in the American society and is declared as forbidden in the Orthodox Judaism community. Roman Catholic Church recently approved its practice in the Christian community and Hindus are the one who practice cremation strongly as compare all other school of thoughts. Muslim community is also not of the view of burning human and the scattering the ashes in the rivers due to potential health hazards. Cementation practice has involved no rich cultural heritage unless and until

Reading Response Essay Example | Topics and Well Written Essays - 1000 words - 1

Reading Response - Essay Example only nighttime visit was permitted, but brief that it could not fill the parental bond effective for raising a child plagued by the torments of slavery. One day he sees the whipping of Aunt Hester by master Antony; a scene that eventually prompts him to move to Baltimore (Douglass 18). The move is a turning moment because it frees Douglass from becoming a slave forever. He starts participating in antislavery campaigns that champion the rights of those still held in the South. Three episodes are central to Douglass in his quest to gain freedom and help other fellow slaves escape the bondage. For instance, the first episode involves the acknowledgement of being slave. Douglass’s decision to take a decisive action emanated from his slavery predicament that exposed him to beatings by his masters such as Mr. Covey. Similarly, the humiliation and fatigue of being overworked in the field plantations features prominently in his life and this prompts his to seek ways of escaping the suffering. This is because Douglass wishes to have a life better than slavery that is only possible in the North. Alternatively, slave identity convinces the narrator on the need to address the matter amicably through freeing other slaves first before taking any action. The second episode is the urge to seek education for emancipation and empowerment in fighting for the thriving slave trade in the South. This transformation occurs after Douglass has moved to Baltimore, Maryland under the ownership of his new mistress called Mrs. Sophia Auld. Unfortunately, this noble venture comes with numerous challenges such as the strong disapproval by Mr. Auld. He rightly knows that an educated slave would become sad and worse, wild. This act, however, affirms Douglass’s zeal to learn how to read and write because it is sanctioned by his master. In other words, he learns that education is tied to liberation especially after comprehending the word ‘abolition.’ Going North and beginning the

Industrialised Building System for Malaysia Public Housing

Industrialised Building System for Malaysia Public Housing The Malaysia construction industry plays an important role in generating wealth to the country and development of social and economic infrastructures and building. The industry provides job opportunities for 800,000 people which represented 8% of total workforce (CIMP, 2006). The construction industry is one of the productive sectors that constantly contribute to the economy. According to CIDB (2003), the IBS is a construction technique in which components are manufactured in a controlled environment (on or off site), transported, positioned and assembled into a structure with minimal additional site works. IBS is not new to the construction industry in Malaysia. Only it has now remerged worldwide into the 21st century as a reasonable solution to improve overall construction image and performance. The Malaysia government has spared no effort to bring IBS to the drawing tables of all professionals involved in the built environment. Based on the IBS Roadmap (2003), the IBS Roadmap 2003-2010 has been endorsed by the Cabinet of Ministers to be the blueprint document for the industrialisation of the Malaysia construction sector. This is because under the Seventh Malaysia Plan (1996-2000) the Government of Malaysia for the first time to introduced the Low Medium Cost Housing category (the previously it was classified together with medium cost housing category) due to the always increasing demand for housing in this category. In additional, it is to ensure that the middle low income group with salary ranging from RM1,501.00 to RM2,500.00 per month and able to own a house. However, the pricing of low medium cost housing are around RM42,001.00 to RM60,000.00 per unit only. Using IBS in this types of housing project are more suitable because high volume and stability of demand for buildings is the advantages of using IBS. Besides that, it will also reduce the selling price of low medium cost housing. The IBS is a manufactured the building components at factories (off site manufacture), will enable cost saving; safety and health; productivity and quality improvement through the reduction of labour intensity and construction standardisation. Apart from this method, it also offers minimal site wastage, less site materials, cleaner and neater environment, controlled quality, and lower total construction costs. Using higher percentage of IBS in the construction of public housing and other building projects will provide better productivity, quality, and safety, especially for the total construction time saving and cost saving. IBS will contribute towards a better construction industry, as well as improve the global competitiveness of Malaysian builders. Nowadays, IBS in Malaysia become more popularity in the construction industry especially for the Government project. An early effort by the Government of Malaysia to promote usage of IBS and develop an Open Building system (OBS) concept as an alternative to conventional and labour intensive construction method has yet to make headway. According to Works Minister Datuk Mohd Zin Mohamed, the prefabricated parts will be used in all Government projects in a proposal to reduce the dependence on foreign workers. Besides that, it wills also reducing inherent social problems involving these foreign workers. The use of prefabricated parts was part of the IBS which would be adopted for all Government projects. The Government of Malaysia has ordered all government agencies carrying out development and peoples housing projects to use at least 70% IBS content in those projects. Aim A study into using IBS in the public housing in Malaysia and the popularity apply in the construction. Objectives To study the history of IBS in public housing. To study the classification of various types of IBS and apply to public housing. To identify the benefits and barriers of the IBS in public housing. To identify as a potential method to improve overall construction performance. To identify as a popularity for public housing. Hypothesis Apply IBS into public housing will be one of the better construction methods to construct the building. For the future, the IBS will become more and more popularity for construction industry in Malaysia. For the construction cost, time and quality, IBS will be the better one to control all the construction cost, to speed up the construction times and to provide high quality of components. Background Since early 1960s, IBS has been introduced in Malaysia by the use of precast concrete beam-column element and panelized system (Thanoon, 2003). Nearly, 22.7 acres of land along Jalan Pekeliling was dedicated to the project comprising seven blocks of 17-storey flats (about 3,000 units of low-cost flat and 40 shop lots). These first pilot projects are using the Danish System of large panels in a prefabricated system. The second pilot project is a six block of 17-storey flats and three blocks of 18-storey flats at Jalan Rifle Range and using French Estoit System. Apply the IBS in the construction industry will improve overall construction performance such as standardization, total quality improvement, reduce defect, waste reduction, cost saving and etc. But nothing in this world is perfect, so some barriers of using IBS in the construction industry will be the poor knowledge of install IBS, lack of guidance, lack of professional trained in IBS and etc. Based on IBS Roadmap (2003), IBS Roadmap 2003-2010 was developed and published to steer the direction of IBS implementation and promotion activities and guide the practitioners and policy makers on IBS related issues. Scope and limitation of study This paper shall identify the common types of IBS in the construction industry and apply into public housing in order to determine their impact on construction projects and popularity for the public housing. This study is part of the ongoing research appraising and analyzing how we use the IBS in construction and how many percentage of IBS are using in the construction project. Therefore, this study will include the following areas: Definition of IBS in public housing. The history of the IBS for public housing in Malaysia. Classification of IBS in Malaysia. Various types of IBS in construction industry and which one is more useful for public housing. The advantages and disadvantages of using IBS for public housing. The selling price and the popularity using IBS for public housing to the contractor. Research Methodology Literature Review In the beginning, literature review was conducted to determine an overall idea regarding IBS for public housing. This refers to collecting the latest secondary data and information from different sources which including books, journals, magazines, dissertations, conference papers, and information from the internet. These materials were used for background reading to obtain full understanding and information needed for discussion and analysis in the research. Questionnaires A questionnaire is a research instrument consisting of a series of questions and other prompts for the purpose of gathering information from respondents. The questions will centre on the KL areas mentioned in the above objectives. A multi-option format will be designed and limited to about 30 questions, in order to obtain a high level of response. Project Plan and Schedule Chapter 1 : Introduction This chapter will include the project title, rationale of the study, scope and limitation of study, research goals and methodology. In addition, aims, objective and hypothesis of the study are included under the research goals. Chapter 2: Literature Review This chapter will display the definition of IBS, history of IBS for public housing, classification of IBS in Malaysia, and benefits and barriers of using IBS in construction project for public housing and this literature review will base on the dissertation objectives. Chapter 3: Research Methodology This chapter will discuss on the technique for data collection to achieve the dissertations aim and objective. Besides, it also includes the research sample and method of analysis for the feedback obtained from the respondents. Chapter 4: Data Analysis This chapter wills surveys and analysisÂÂ  the data collectionÂÂ  from the contractor, consultant and developer of people about their opinions, behaviour or knowledge. Chapter 5: Conclusion The conclusion will include summary on the dissertation from chapter 1 to chapter 4 together all the research result to present the overall findings and make appropriate recommendations. References CIDB, 2003. IBS Roadmap 2003-2010. Malaysia: CIDB. CIDB, 2003. National IBS Survey, 2003. Malaysia: CIDB. Kamar, K.A.M.,Alshawi,M. And Hamid,Z.,(2009). Barriers to Industrialised Building System (IBS): The Case of Malaysia. [pdf] United Kingdom: IPGRC. Available at: http://www.cream.com.my/publications/whitepapers/Abstract111.pdf. [Accessed 15 May2010] Mohd Rofdzi Abdullah, Kamarul Anuar Mohd Kamar, Mohd Nasrun Mohd Nawi, Ahmad Tarmizi Haron, Mohammed Arif, (2009). Industrialised Building System: A Definition and Concept. [pdf] United Kingdom: ARCOM. Available at: http://www.cream.com.my/publications/whitepapers/Arcom.pdf. [Accessed 05 May 2010] CHAPTER 2:Â  LITERATURE REVIEW 2.0 Introduction This chapter will explain in details and provide the literature review of Industrialised Building System (IBS). Besides that, it will also cover the literature review of building system. Usually, the contents of this chapter are including definitions of IBS, history of IBS in public housing, classification of IBS, types of IBS, characteristic of IBS, benefits and barriers of using IBS in public housing, IBS Roadmap 2003-2010 and IBS scoring system. 2.1 Definitions of IBS Until the present time there has been no single commonly-approved definition of IBS. IBS can be different industry players to define different things. However, there are difference resources to define the several definitions that reflected the concept of IBS and which widely accepted by the construction industry. According to CIDB Malaysia (2001) defines IBS as a construction technique in which components are manufactured in a controlled environment (on or off site), transported, positioned and assembled into a structure with minimal additional site works. As such, components that are being prefabricated in a controlled environment on site are also considered as IBS. While there are numerous descriptions of the IBS concept by local researchers, all of the definitions stressed on prefabrication and mass production. In other definition by Warswaski (1999), the IBS can be defined in which all building are mass produced such as walls, slabs, beams, columns and staircases either in factory or at site factory under strict quality control and minimal wet site activities. Industrialisation process is an investment in equipment, facilities and technology with the purpose of maximising production output, minimizing labour requirement and improving total quality while a building system is defined as a set of interconnected element that joint together to enable the designated performance of a building. Based on Lessing et al (2005) explained IBS as an integrated manufacturing and construction process with well planned organization for efficient management, preparation and control over resources used, activities and results supported by the used of highly developed components. Rahman Omar (2006) defined IBS as a construction system that is built using prefabricated components. The manufacturing of the components is systematically done using machine, formworks and other forms of mechanical equipment. The components are manufactured offsite and once completed will be delivered to construction sites for assembly and erection. Chung Kadir (2007) defined IBS as a mass production of building components either in factory or at site according to the specification with standard shape and dimensions and transport to the construction site to be re-arranged with certain standard to form a building. 2.2 History of IBS in Public Housing IBS in Malaysia has began in early 1960s, according to Thanoon et al (2003) when Ministry of Housing and Local Government of Malaysia visited several European countries, at the same time evaluates their housing development program. In the year 1964 and after their successful visit, the Government had launched pilot project on using IBS to increase the delivery time and to construct better quality and affordable houses. The first pilot project was constructed at Jalan Pekeliling in Kuala Lumpur and about 22.7 acres of land was dedicated to the project comprising four blocks of 4-storey flats and seven blocks of 17-storey flats and comprising total about 3,000 units of low cost flats for the low and median income group and 40 units of shop lots. This housing project was undertaken by Gammon/ Larsen Nielsen and this project are using the Danish System of large panels in a industrialised prefabricated system. According to Thanoon et al (2003), the construction for housing project was complete from 1966 until 1968 (around total 27 months) speed up the time taken in the construction of the around RM 2.5 million casting yard at Jalan Damansara. In 1965, the Government of Malaysia launched a second project, is a three blocks of 18-storey flats and six blocks of 17-storey flats and comprising total about 3,699 units and 66 units of shop lots along at Jalan Rifle Range in Penang. The housing project was honoured by Hochtief/ Chee Seng and this project are using French Estoit System (Din, 1984). This housing project was complete within 27 months. If we are mention to the two pilot projects, a performance comparison between the IBS and the conventional system has been carried in terms of cost, productivity, quality, and time. According to the research, the first pilot project incurred 8.1% higher costs than a similar building such as using conventional construction method, while the second pilot project was lower. In term of total construction speed, both of the housing project required total 27 months to complete the whole project, inclusive of time required to set up the recasting factories. The total quality of building finishes was also found to be better than the using conventional construction method. Another earliest using IBS in public housing project was at Taman Tun Sardon in Penang. These using IBS in public housing project total all about 1,000 units of 5-storey walk up flat and this project are using IBS precast component and system. The IBS precast component and system in the housing project was designed to the low cost housing by British Research Establishment and especially for the low and median income group. According to the research of Construction Industry Development Board Malaysia (CIDB) 2006, almost at the same time at Edmonton in North London, there are using similar system was constructed and total amount about 20,000 BRECAST dwellings were constructed throughout UK from 1964 until 1974. Based on Rahman and Omar (2006), the total all building design was very basic and quite simple and not considering the feature of serviceability such as the local or user needs to have wet toilet and bathroom. According to the CIDB (2006), many constructions in the following years using precast wall panel system. Low cost high rise residential building is one of the processes to survey that IBS was connect at first place in the construction to overcome the increasing demand for housing needs. For all that, in the earlier stage was never sustained for the industrialisation of construction. Failure of early closed fabricated system made the industry afraid of changing their construction method. The information was based on the CIDB (2005), using IBS in construction were also found not be so suitable with Malaysia climate and social practices especially for the foreign systems that were introduced during the late 60s and 70s. Introduced than in the construction market were constantly being newer and better technologies. Based on CIDB (2005), identified to be suitable to be used in our tropical climate is the wet joint systems and it was also better to using in the bathroom types which were comparatively wetter than those in the Europe. Another about 1200 units of housing using prefabrication technology were is launched by the Penang State Government in 1978. After two years later, the Ministry of Defense to be build around 2800 units of living quarters and adopted large prefabricated panel construction system in Lumut Naval Base (Trikha and Ali, 2004). Enhance the using of precast concrete system in high rise residential building during the 90s; this is because total demand for the new township has seen to increase. According to the research, Perbadaan Kemajuan Negari Selangor (PKNS) as a state Government development agency acquired precast concrete technology from Praton Haus International based on Germany to build low cost housing and high cost bungalows between 1981 and 1993 for the new townships in Selangor (Hassim et al, 2009 and National IBS Survey, 2003). It was recorded then; total around 52,000 housing units was constructed and using Praton Haus system. In Malaysian construction industry, using IBS as a method of construction is evolving. Nowadays, more local manufacturers have established themselves in the market. Many had acquired enough knowledge through technology transfer to build up own capacity in IBS technologies and this research are base on PKNS Engineering, and Setia Precast and Global Globe. The current stage of IBS used in Malaysia housing projects can be classified into four categories. It was reported that at least 21 manufactures and suppliers of IBS are actively promoting their systems in Malaysia. IBS move to the next step of the development through the establishment of IBS Centre at Jalan Chan Sow Lin, Cheras in Kuala Lumpur. Using IBS in the construction will improve the total performance and quality of construction, as well as to minimize the unskilled foreign labour in the construction industry. 2.3 Classification of Building System There are four types of building system currently available in Malaysias building system classification and this are according to Badir Razali (1998). The building system can be namely as a Conventional Column-beam- slab frame system with timber and plywood; Cast in-situ system with steel or aluminium as formwork; the Composite building system and Prefabricated system and this four types of building system is shown as below. Each building system is represented by its respective construction method which is further characterised by its construction technology, functional and geometrical configuration. There from the four systems, are identified as IBS excluding conventional building system. Building System Conventional Column-beam- slab frame system with timber and plywood. Cast in-situ system with steel or aluminium as formwork. Composite building system Prefabricated system Table Form Tunnel Form Panel system Frame system Box system Flow Chart 1: Type of building system in Malaysia. 2.3.1 Conventional Construction Method Conventional construction method is defined as components of the building that are prefabricated on site through the processes of timber or plywood formwork installation, steel reinforcement, and cast in-situ. This construction method is mostly built of reinforced concrete frames for conventional building. Using the wooden formwork mainly is for the traditional construction method and need take some time to construct the formwork before concreting. This construction method is much more costly for construction which is need includes total labour requirement, raw material, transportation and very importance once is low speed of construction. 2.3.2 Cast In-Situ Construction Method This cast in-situ construction method is more suitable for a country where the unskilled labour is limited. There construction method is not a using heavy machinery or high technology involved. The system is technically and applicable to almost all types of building design. The formwork is used as a mould where wet concrete is poured into a temporary system and the temporary system also acts as a temporary support for the structures. The main objective of a cast in-situ construction method is to weed out and reduce the using traditional timber formwork, brickwork, and plastering. A carefully planned in-situ work can maximise the productivity, speed and accuracy of prefabricated construction. Cast in-situ method uses lightweight prefabricated formwork made of steel or fibreglass or aluminium that is easily erected and dismantled. The steel reinforcement is placed within the formwork after finishes construct the formwork. After placing the reinforcement they are being erected and concrete is poured into the mould. When the concrete is set and according to the required strength, the moulds are dismantled. The workers can be easily trained to erect the moulds and set the steel reinforcement. These construction methods are required limited labour and it will reduce the total labour need. Its advantages over the conventional construction method include, low skill workers requirement, speedy construction, low building m aintenance, durable structure and less construction cost. 2.3.3 Composite Construction Method The main objectives of composite construction method or call partially prefabricated are to improve quality of components, reduce construction cost, and shorten total all construction time. It is used to describe a manufacturing or production strategy that selectively uses some industrialising aspects, while avoiding or postponing the use of others. The concept of composite construction method is derived from the composite nature of full industrialisation. The prefabricated construction method is combined in such a manner that the features applied could be prominently demonstrated, especially composing various works such as temporary facilities, building frames, building finishes, and equipments. 2.3.4 Prefabricated Construction Method In this prefabricated construction method, all structural elements can be standardised are prefabricated in the factory. Usually, this construction method would absorb the assembly of precast elements such as floor slabs, in-filled walls, bathrooms, and staircases into place for incorporation into the main units, columns and beams. This construction method will increase the productivity of the industry and it will reduce the amount of site labour involved in building operations. Precast building systems can reduce the time of a project if certain conditions are met. The last three construction methods (from the flow chart 1) are considered as a non conventional construction methods. These three types of construction method are specifically aimed at increasing performance of construction. Through using the better construction machinery, equipment, technology and materials and it will increase the productivity and total quality of work. 2.4 Classification of IBS According to Badir et al. (1998), IBS can be classified according to several aspects:- Classification according to structural system. Classification according to material. Classification according to relative weight of components. 2.4.1 Classification According to Structural System According to Abraham Warszawski (1999), IBS can be classified according structural systematic aspects. The IBS can be classifies into three categories such as:- Frame System. Panel system. Boxes system. Figure 1, 2, and 3 below as shows the concept of the system as classified above. 2.4.1.1 Frame System According to Badir (1998), linear and frame system is system that use main structure such as column and beam where columns and beams support all the building weight. The walls need to be light and easy to install and concrete panels are introduces as flooring element. 2.4.1.2 Panel System According to Badir (1998), in the panel system, loads are distributed through large floor and wall panels where walls support the building weight. This system is applicable to buildings which functionally require a large number of walls such as apartment house, hotel and hospital. This system is not applicable to buildings with large spans or many stories. So, this panel system is more suitable to build the public housing in the certain high storey. 2.4.1.3 Box System According to Badir (1998), the rectangular or three dimensional systems or boxes system include those systems that employ three dimensional modules or boxes for fabrication of habitable units that is capable of withstanding load from various directions due to their internal stability. 2.4.2 Classification According to Material 2.4.2.1 Timber The timber have a two types of prefabrication which is ready-cut plus shop fabrication of joints this mostly for the columns and beams and another is structural panels where there are only for walls and floors without columns and beams. 2.4.2.2 Brick and Block work Laying of brick or block work are carried out in a mass at factory and transported to site or on site construction. Besides the, building are under construction in the form of panel and then erected. 2.4.2.3 Steel Steel construction essentially contains factors of prefabrication which is one of the criteria of IBS. Elements are jointed by welding, riveting or bolting on site. The large proportion of the strength to the weight allows a long-span or high-rise building. 2.4.2.4 Reinforced Concrete There are two basic directions in development of reinforced concrete IBS component which is panelised components such as walls and floors and precast frame members such as columns and beams. The characteristic of reinforced concrete has high degree of availability, low material cost, durability, and fire resistance. Jointing at site is the key issue of this system. 2.4.3 Classification According to Relative Weight of Component The IBS components can be classified according to their relative weight as show in Table 1 below. Relative to weight of components should be used as a basic for building classification due to the factor of weight has significant impact on the transportability of components and has influence on the production method of the components and their erection method on site. No General System System Production Material 1 Frame System Light weight frame Wood, light gage metals Medium light weight frame Metal, reinforced plastics, laminated wood Heavy weight frame Heavy steel, concrete 2 Panel system Light and medium weight panel Wood frame, metal frame and composite material Heavy weight panel (factory produced) Concrete Heavy weight panel (tilt up-produced on site) Concrete 3 Box system (modules) Medium weight box (mobile) Wood frame, light gage metal, composite Medium weight box (sectional) Wood frame, light gage metal, composite Heavy weight box (factory produced) Concrete Heavy box (tunnel produced on site) Concrete Table 1: Building system classification according to relative weight of component. (Majzub, 1977) 2.5 Types of IBS and Apply to Public Housing According to CIDB (2003), the IBS is a construction process that using techniques, products, components, or building system which involve prefabricated components and on-site installation. Base on the structure aspects of the system, IBS can be identified into five major groups such as:- Precast Concrete Framing, Panel and Box Systems Precast concrete elements are the most common type in this area. There are precast concrete for columns, beams, slabs, walls, lightweight precast concrete, and permanent concrete formwork. This all item are consider using precast method. Besides that, it is also consist of 3D components such as balconies, staircases, toilets, lift chamber, refuse chambers and etc. This precast method is more famous for the construction industry, especially for the public housing when construct using the IBS. Using this method can saving the total construction time if compare to the conventional method. Steel Formwork Systems This is the system formwork which designed by manufacturer to replace a conventional timber formwork. It can be described as a mould which the wet concrete can be poured into the mould and form the required shape. These steel formworks systems are subjected to structural quality control and generally involve site casting. So, this type of IBS method is considered as the low level or least prefabrication in the construction industry. However, this steel formwork systems does offer fast construction and construction time saving and at the same time will provide high quality of finishes with less site labour and material requirement. These steel formwork systems will include table forms, tunnel forms, tilt-up systems, beam and columns moulding forms and permanent steel formworks like metal decks and etc. This steel formwork system also one of the famous system used by the contractor during the construction. Steel Framing Systems These steel framing systems have always been the popular choice and used extensively in the fast track construction projects and this system commonly used with precast concrete slabs, steel columns and beams. Current stage of development in this type of IBS includes the increased usage of light steel trusses. It is consisting of cost-effective profiled cold-formed channels and steel portal frame systems as alternatives to the heavier traditional hot-rolled sections. Nowadays, this method is more useful for the housing project, especially for the steel roof trusses (show as below figure 6). This is because the timber roof trusses need the labour to take some time to construct it and lastly need the anti-termite for the timber roof trusses. Prefabricated Timber Framing Systems These prefabricated timber framing systems is using the timber in the construction industry for construct the building. Usually the timber framing system are consists of timber building frames and timber roof trusses (show as below figure 7). While the steel framing systems have been the more popular choice on construction industry, but the timber roof truss system also have its own market where it is offering interesting designs from simple dwelling units to buildings requiring high aesthetical values such as chalets for resorts. This prefabricated timber framing system we can see in the traditional building. Block Work Systems By using this effective alternative system, the tedious and time-consuming traditional brick laying tasks are greatly simplified. The construction method of using conventional bricks has been revolutionize

Exposing the Truth in There Are No Children Here :: There are No Children Here Essays

There Are No Children Here – Exposing the Truth  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚      Since I find myself most interested and concerned with the problems of children in our country I have decided to focus on one area densely populated by children who suffer from numerous disadvantages. The modern day ghetto is rampant with violent crime, gang activity, and death. From 1985 to 1993 the amount of children who died as a result of violent death got ten percent worse. Rather than believe otherà ­s opinions as to why this is true I have decided to investigate the situation myself. Rather than just blaming the individuals within the affected areas I would like to expose the reason behind the behavior so as to find where the real fault lies and what the solution is.    Los Angeles is a city where fear of crime and criminals is arguably the single most important social and political issue for the majority of citizensà ® (Zimring Hawkins 46). In other words in Los Angeles there is so much crime and violence that it is the primary concern for the citizens of the area, according to numerous sources it is safe to say this of many urban areas of low socio-economic status. South Central Los Angeles as well as many other ghettos have such widespread gang activity. Gang activity has essentially taken over the normal way of life. Innocent people are no longer safe in their neighborhood. With gang members as young as ten years old, many people wonder, what makes children so violent and deviant at such a young age? Where do people like Kody Scott, an LA gang member notorious for his extreme violence and brutality, come from? Is he to blame? Are his parents to blame? Are these type of people born with violent minds, do they watch too much violent television, a re they influenced by violent friends It seems as though the answer to this question could be one of a million different possibilities.    However, after all the research and reading that I have done regarding this issue I feel as though violent children of the ghetto are not à ¬badà ® at all, but a product of their bad neighborhood. The difference between these two explanations is: A. where the blame lies and B. what are the solutions. It is not only frustrating to me to hear someone blame the individuals for their deviant behavior but it accomplishes nothing.

Comparative Essay: Iphone vs. Samsung Phone

Comparative essay: IPhone vs. Samsung phone Technique: Point by Point In the 21st century, the smart phone has already become an indispensable instrument in human life. Human beings rely on smart phones in recording everything in their daily life. There are different smart phone manufactures all around the world such as Samsung, Apple, Nokia, Motorola and so on. Among the smart phone manufacture, the Apple and Samsung smart phone manufacturer are the leader in the smart phone world. Thus, the products from these two manufacturers are famous among the users, such as the Apple iPhone 5 and the Samsung Galaxy Note 2.Therefore, when we decide to buy a smart phone on either Apple iPhone 5 or the Samsung Galaxy Note 2, we should consider several aspects of the smart phone such as the design of the phone, the camera aspect, the life of battery can stand, call quality and the interface and function of the smart phone. First, we touch about the fabulous design of both the phones. The latest d ebuted iPhone 5 has created an entirely new design that thinner and lighter than the iPhones before. It is just 7. 6 millimeters amazing thin and weighs 112g that made out of glass and aluminum.Moreover, its 4 inches screen is palm-friendly and easily to operate with just one hand. It is not only comfortable you can say about the phone when a crystalline diamond is used to cut the chambers which give the beveled edge wonderful sheen, it makes you gorgeous even when you hold it. On the other hand, Samsung Galaxy Note 2 is much bigger than iPhone5 that is 5. 5 inches screen, 9. 4mm thin and 180g weight. It offers perfect and fantastic viewing experience just like cinema like-viewing. As for one-handed operation, it is not impossible.It provides ways to scooch the on-screen keyboard or the dialer which iPhone5 cannot be beat. Besides, it has a non-unibody chassis that allow us to easily swap SIM cards, batteries or expand storage via a microSD slot. Since the design of the phones is in comparable which means they have their own unique design, we would like to compare other features on both of the phones. By comparing the camera of iPhone 5 and Samsung Galaxy Note II, the iPhone 5 mostly takes care of everything on its own. The iPhone 5 has a fast HDR mode and a new option for panoramic photos, which up to 28 megapixels.The picture quality of iPhone 5 has high levels of details and good colour representation, without excessive noise. The iPhone 5 can manage scenes with high dynamic range better, and it also sports more constrast in its pictures, making them more visually appealing. The 1080 videos of iPhone 5 and the Note II exhibit the same great amount of detail and crisp focus as the still scenes, with 30fps inside and outdoors. The iPhone 5 footage comes with higher contrast, and looks less washed out under bright sunlight.For the Note II, it offers most major options like face/smile recognition, Panorama, HDR, low light mode and many others. It also has an abu ndance of scene and focus modes, as well as number of colour effects. The picture and video gallery on Note II split the screen with folders on the left for faster navigation and has richer editing capabilities built into it. The music players on both devices also offer tune categorizations and minimalistic interface. Note II offers more functions via sound modes and equalizer. Note II also has an FM radio.Both handsets also have excellent quality of loudspeakers, but the iPhone 5 unit sounds a tad fuller and clearer. The interface and functionality of these two phones run different operating system, which the Apple iPhone always run on iOS system, and now the iOS is updated to the version iOS 6 while Galaxy Note II runs the latest version of android system that is Android 4. 1 Jelly Bean. Android also offers plenty of customisation on the home screen and users can utilize widgets, custom launchers, custom keyboards and more.Android also doesn’t have to rely on iTunes for con tent synchronising and transfer and the iPhone 5 has the traditional grid of icons and everything else is pretty much neatly tucked away under settings. In terms of customisation, picking a wallpaper and ringtones can be used. Moreover, the processors and memory inside these two phones are different too. Apple using manually designed with 1. 3 GHz dual-core A6 processor with its own core architecture, while the Galaxy Note II is equipped with a quad-core at 1. 6GHz.The Note II can do multitasks efficient than iPhone 5. Besides that, the performance of the two phones also is depended on the user how to function it. Furthermore, the iPhone 5 has 1 GB of RAM, while the Galaxy Note II has 2 GB of the thing, and both have the basic versions starting with 16 GB of internal memory, going up to 32 GB or 64 GB variants. The Note II, however, sports a microSD slot for cheaper storage expansion. In overall, the interface and functionality of Samsung Galaxy Note II is better than Apple iPhone 5 . In contrast on the attery task, the Note II has the largest screen ever placed in a phone, and also the battery match with a 3,100 mAh unit tucked in neatly into its large body. It is rated for 35 hours talk time in 2G mode and 16 hours of talk time in 3G mode, and furthermore more than a month of standby (up to 890hours). However, the iPhone 5 has a 1,440 mAh battery, and is rated for 8 hours of talk time in 2G and 3G mode. Both handsets will deliver more than 10 hours of browsing or video watching on a charge, which are excellent results.On the other hand, the similarity of these two smart phones is discovered by smart users. There is an aspect that quite alike, which, aspect on calls quality. In the aspect call quality, both iPhone 5 and Note II carrying remarkable call quality, with loud and clear voices in the earpiece, even clean sound relay to the other end. The noise-cancelling do a very good job of weeding out the background noisy, with the iPhone 5 sporting a tad better sound capture probably thanks to the tri-mic setup it has going on. In a nut shell, the two phones functioning well in call quality.In conclusion, both Apple and Samsung products, Apple iPhone 5 and the Samsung Galaxy Note 2 have their own advantages and disadvantages. Thus, it falls upon the user to compare the similarities and differences between Apple iPhone 5 and the Samsung Galaxy Note 2 such as the design of the phone, the camera aspect, the life of battery can stand, call quality and the interface and function of the smart phone before buying the smart phone. Moreover, it’s also depending on the need of the user on the aspect. A- Group members: See Li Min Tan Sheue Ley Tan Siok Ying Chan Yi Qi Pei Leng

Whitmans Song of Myself Spirituality and Religion

Whitman's Song of Myself Spirituality and Religion Spirituality is a mixed bag for the great American  poet, Walt Whitman.  While he takes a great deal of material from Christianity, his conception of religion is much more complicated than the beliefs of one or two faiths mixed together. Whitman seems to draw from the many roots of belief to form his own religion, putting himself at the center. Examples From the Text Much of Whitmans  poetry resounds with Biblical allusions and innuendo. In the very first cantos of Song of Myself, he reminds us that we are formed from this soil, this air, which brings us back to the Christian Creation story. In that story, Adam was formed from the dust of the ground, then brought to consciousness by the breath of life. These and similar references run throughout Leaves of Grass, but Whitmans intent seems rather ambiguous. Certainly, he is drawing from Americas religious background to create poetry that will unify the nation. However, his conception of these religious roots seems twisted (not in a negative way) - changed from the original conception of right and wrong, heaven and hell, good and bad. In accepting the prostitute and murderer along with the deformed, trivial, flat, and despised, Whitman is trying to accept all of America (accepting the ultra-religious, along with the godless and un-religious). Religion becomes a poetic device, subject to his artistic hand. Of course, he also seems to stand apart from the grime, putting himself in the position of the  observer. He becomes a creator, almost a god himself, as he speaks America into existence (perhaps we could say that he really sings, or chants, America into existence), validating every element of the American experience. Whitman brings philosophical significance to the most simple objects and actions, reminding America that every sight, sound, taste, and smell can take on a  spiritual importance to the fully aware and healthy individual. In the first cantos, he says, I loafe and invite my soul, creating a dualism between matter and spirit. Throughout the rest of the poem, though, he continues this pattern. He constantly uses the images of body and spirit together, bringing us to a better understanding of his true conception of spirituality. Divine am I inside and out, he says, and I make holy whatever I touch or am touchd from. Whitman seems to be calling to America, urging the people to listen and to believe. If they wont listen or hear, they may be lost in the perpetual Wasteland of the modern experience. He sees himself as Americas savior, the last hope, even a prophet. But he also sees himself as the center, the one-in-one. Hes not leading America toward  T.S. Eliots  religion; instead, he is playing the part of the Pied Piper, leading the masses toward a new conception of America.

Principles of Direct Marketing Example

Principles of Direct Marketing Example Principles of Direct Marketing – Research Paper Example Principles of Direct Marketing The Facts: The direct media used for this communication is internet. This email had arrived on Wednesday, October 20, 2010, at around 8 O’clock in morning. The Device: Description: The communication was in the form of an email. The subject line was â€Å"Grab the opportunity before it elapse†. The email was quite colourful, having a picture of Santa holding a bag. From the bag, gifts were continuously coming out and on each gift, the word â€Å"discount† was flashing. The whole body of the e-mail had small pictures of gifts, balloons, stars and bells. I received the mail early morning, and as soon as I clicked on the inbox, my attention went straight to that mail. Offer: This email was regarding Christmas sale taking place in a shopping mall in which high discounts were offered on different gift items, clothes, jewellery electronic items, toys and many more. It was stated that one can avail discounts up to 80 percent on different items. The creativity: The email was designed in a manner that would seek immediate attention. The email used different icons like Santa, gifts, balloons and other decorative objects to create a Christmas feel. The colour combination was restricted to bright hues like red, white and black. Flash was used to make things livelier. Cost: Since the mode of communication was an email, hence the cost of sending the document was nil. However, the company had to pay for developing the graphics of the email. The single mail was send to millions of persons at a practically negligible price. Analysis: The shopping mall was trying to reach out to shoppers purchasing for Christmas and thanksgiving. The company attempted to target that customer base that uses internet on a regular basis to communicate and prefers to purchase goods from shopping malls. This email was used as a tool by the shopping mall to motivate the target customers to purchase gifts and other goods for Christmas and thanksgiving from them. With time, the degree of competition has increased in the retail market. The companies thereby resort to aggressive advertising and attractive promotional tools to attract customers. This mail was a part of the marketing campaign of the company. It was used for making people aware of different marketing promotional tools like high rate of discount, coupons for free lunch and free passes for the theme park to selected customers. The reason for targeting me is, I believe, that I visit the mall far too often. There I filled a form for luck draw where I was asked to provide my name, some personal details along with my email id. The company might have accessed my personal details from such data base. The email was indeed very attractive. The graphics and texts were designed in manner that grabbed immediate eyeballs. However, some information was exaggerated that did create a negative impression on the reader’s mind. If I wasn’t in this class I might not have responded to this email. The fact that Christmas and thanksgiving is just a month away is a reason good enough to respond to this mail. I think this communication process will help the shopping mall to attract more customers in this festive season. Though the email was quite effective in conveying the information but more innovation could have been done in the manner in which the information is presented. This would have made the mail more comprehendible and attractive for the readers. Bibliography Kimmel, A. J. Marketing communication: new approaches, technologies, and styles. Oxford New York: Oxford University Press. 2005.

The Patients Rights While Providing Care Essay Example | Topics and Well Written Essays - 1500 words - 1

The Patients Rights While Providing Care - Essay Example the primary challenge in my practice arises from the fact that the capacity to consent is yet from being tested, and the benefits and risks have been illustrated. In this case, capacity refers to the ability to use and understand information to make a sound decision and communicate any decision made to the respective caregivers. A voluntary consent simply the decision to either consent or not to consent to treatment and must be made by the person themselves and must never be influenced by pressure from medical staff, family and friends. Whereas informed consent is where the patient has to be issued with all the pertinent information in terms of what the treatment is all about including the benefits and the risks attached beside whether there are reasonable option interventions and whatever will occur if such a treatment is not executed or delayed. Valid consent is also determined by capacity in which a nurse must be able to determine that capability of the patient to give a consent t hat means they understand the information is given to them and they can utilize such information to make a rational and informed decision. In case an adult has the capacity to make a voluntary and informed decision to consent or refuse a particular treatment or examination, the law requires that such a decision must be honoured even if the refusal would collapse into death or death of the unborn. On the other hand, where a patient has no capacity to make a decision about their treatment, the nurse examining them can advance and give the treatment if they believe it is in the patient best interests.

Do corporate social responsibility (CSR) reports provide shareholders Essay - 1

Do corporate social responsibility (CSR) reports provide shareholders and stakeholders with useful information on corporate soci - Essay Example Emphasizing on the corporate social responsibility has become a core part of the public policies for development of private sectors within the framework of the international cooperation development. It is considered a deliberate choice for an enterprise to give back to the community and to respond the environment crises while maintaining relations with the shareholders and stakeholders based on dialogue and transparency (Godfrey, Merrill & Hansen 2009). A CSR report, therefore, consists of all activities that the company has taken part. This includes the whole of their chain of value and it considers the effects on ecological, economic, and social parameters in dialogue with the shareholders and stakeholders. The report conveys the following information to the public and to the stakeholders: consumer interest, environmental care, air operating practices such as corruption and bribery, involvement to the community and firm’s governance. A company will therefore, use the report to reach to its consumers, shareholders, and stakeholders. Corporate managers and leaders have taken the initiative to call upon the government, as a stakeholder, to recognize their CSR participation and achievements. The companies can only achieve that by creating a CSR report that communicates to the society on its CSR activities. The government has gone ahead to encourage, support and to enforce Corporate Social Responsibility behavior of firms (Turker 2009). This has therefore resulted to multiple rationales, such as deregulation and competitiveness in companies by including their CSR reports in their annual reports. However, the legal standards and frameworks have been put in place in order to ensure the companies include the appropriate information. This is because some of the stakeholders and shareholders are non-profit agencies which require in knowing the benefit of the company to the community before investing in it. The government also requires knowing how the company res ponds to environmental issues such as pollution and global warming. It is important to note that most stakeholders including investors, community, markets, NGOs and the government need to know the role of a company to the society and their role in ensuring the environment is maintained. For instance, the mentioned groups expect organizations to put efforts in fighting global warming and feeding the poor. It is humble call for a company to do that, but it has a great effect to the consumers and to the investors. Consumers want to be associated with a company that understand their needs and which cares for their future. As well, investor will invest in a company that has responsible management and that which takes part in CSR activities. Background information Since the early years of 1990, an increase in the environmental awareness and development of sustainable economic growth redirected firms into environmental sensitivity. The recent economic events have resulted to a greater emph asis on the Corporate Social Responsibility in redefining the future of the society. Whereas companies and business organizations are responsible of creating wealth for the shareholders and driving company’ progress, they are directed and guided by regulations and governments, green consumer pressure and society pressure groups (Henriques & Sadorsky1999). A balance between needs of the society and economic growth attracts